Log In or
Enter your e-mail address to receive our newsletter
Your basket is empty.
MOTION PRO® FOLDING SAG SCALE
Inch and metric scale combination
Will work on mini and full size bikes
For shock and fork sag
Installs in rear axle
Adjustable zero set point with extende…
Motion Pro Fork Alignment Tool
Quick and easy to use tool for aligning front forks to insure they are parallel from top to bottom
Knurled adjustment screws for easy setup
Reduces stiction and improves the performance of y…
Motion Pro Fork Cap Wrench
For removing the fork caps on late-model RMs, CRs & others
Can be used for removal of a compression stack on late-model RMs
One end is 46mm, the other is 50mm
Motion Pro Fork Oil Level Tool
For checking and adjusting the oil level on all conventional and single chamber cartridge forks
Adjustable ring will measure oil levels from 0 to 300mm in 0.5cm increments
Syringe has a capaci…
Motion Pro Fork Seal Driver
CAD-II plated carbon steel split design.
Weighs approximately 25oz.
Race Tech Cartridge Rod Holding Tool
The Cartridge Rod Holding Tool allows you to more easily disassemble and assemble KYB and Showa Twin Chamber and most street cartridge forks. When applied, the tool holds back the spring force allowing …
Race Tech KYB Dual Chamber Compression Body Tool
This tool removes the Compression Body from the cartridge on Twin-Chamber KYB forks
RIDER’S WRENCH BY FREDETTE
Made in the U.S.A.
Available in popular sizes to fit virtually all off-road machines
Combines three wrenches in one: 2-stroke spark plug/front axle/rear axle
STEERING STEM WRENCH by Moose Racing
Made in the U.S.A.
Nickel plated for rust resistance
12-point flat profile wrench fits steering stem and fork cap nuts without removing handlebars
Copyright© 2009 - 2014. All rights reserved to Precision Concepts Racing
eCommerce Software by CubeCart